Ekotoxikologické centrum Bratislava, spol. s r.o.



ATTENTION! Karty bezpečnostných údajov31 May 2018 is the final deadline for substances in range of 1 - 100 tonnes per year. Remaining time:

Actual info

Call for companies to continue their SIEF cooperation after the deadline

Kontaktná skupina riaditeľov (DCG) odporúča, aby registrujúci existujúcich látok udržiavali svoje platformy spolupráce aj po poslednom termíne registrácie 31. mája 2018.

SECTION 10: Stability and reactivity

Informations are provided from COMMISSION REGULATION (EU) No 453/2010 of 20 May 2010 amending Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)

This section of the safety data sheet shall describe the stability of the substance or mixture and the possibility of hazardous reactions occurring under certain conditions of use and also if released into the environment, including, where appropriate, a reference to the test methods used. If it is stated that a particular property does not apply or if information on a particular property is not available, the reasons shall be given.

10.1. Reactivity

10.1.1. The reactivity hazards of the substance or mixture shall be described. Specific test data shall be provided for the substance or mixture as a whole, where available. However, the information may also be based on general data for the class or family of substance or mixture if such data adequately represent the anticipated hazard of the substance or mixture.

10.1.2. If data for mixtures are not available, data on substances in the mixture shall be provided. In determining incompatibility, the substances, containers and contaminants that the substance or mixture might be exposed to during transportation, storage and use shall be considered.

10.2. Chemical stability
It shall be indicated if the substance or mixture is stable or unstable under normal ambient and anticipated storage and handling conditions of temperature and pressure. Any stabilisers which are, or may need to be, used to maintain the chemical stability of the substance or mixture shall be described. The safety significance of any change in the physical appearance of the substance or mixture shall be indicated.

10.3. Possibility of hazardous reactions
If relevant, it shall be stated if the substance or mixture will react or polymerise, releasing excess pressure or heat, or creating other hazardous conditions. The conditions under which the hazardous reactions may occur shall be described.

10.4. Conditions to avoid
Conditions such as temperature, pressure, light, shock, static discharge, vibrations or other physical stresses that might result in a hazardous situation shall be listed and if appropriate a brief description of measures to be taken to manage risks associated with such hazards shall be given.

10.5. Incompatible materials
Families of substances or mixtures or specific substances, such as water, air, acids, bases, oxidising agents, with which the substance or mixture could react to produce a hazardous situation (like an explosion, a release of toxic or flammable materials, or a liberation of excessive heat) shall be listed and if appropriate a brief description of measures to be taken to manage risks associated with such hazards shall be given.

10.6. Hazardous decomposition products
Known and reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating shall be listed. Hazardous combustion products shall be included in Section 5 of the safety data sheet.


ECHA substances (click):

Pre-registered substances Registered substances

Substances of Very High Concern identification